The 10AT is a fully automated seamer for closing cans in atmosphere. It comprises a single seaming station, with automated lid placement and servo driven indexing turret. Parallel infeed and outfeed conveyors allow the 10AT to be positioned in an existing line without the need for altering configuration.
The machine is manufactured fully from 316 stainless steel and FDA and EU approved blue acetal plastic where delicate can handling is required. Food grade lubrication is used where absolutely necessary but in minimal places and robust oil seals ensure there is no lubrication in food contact areas.
Cans are fed into the seamer, through adjustable conveyor guides on a stainless steel conveyor, powered by a high quality SEW helical gear motor. A top of the range Siemens S210 servo motor connected to a low backlash, food grade Wittenstein gearbox, drives the indexing turret.
The 10AT has inbuilt checks and alarms for any issues, such as end in place sensor for no lid, no seam and alarms for any time the seaming roll hasn't been able to move to the correct set point, indicating an incomplete seam.
All of the settings are adjustable on the Siemens touch screen HMI. The HMI also includes production monitoring, seam adjustment and indexing turret acceleration, top speed and deceleration control. The control system has a remote access module that allows Innovus to diagnose any potential faults and also monitor run time for servicing requirements. This module is connected to the network through either 4G, Wi-Fi or Ethernet, depending on customer preference.
Technical Data
- Compressed air input: 10 mm hose push in connector / 3/8" BSP / 10 bar max./ 6 bar min / Maximal consumption of 150L min
- Power supply : 3-phase 400 V / 50-60Hz, current consumption 16A max
- Dimensions: 1200 x 2200 x 1700mm (W x D x H)
- Net weight : 450kg